NEW MICRO CENTER OFFERS EXCEPTIONALLY ACCURATE AND HIGH SURFACE QUALITY MILLING
Yasda Precision America Corporation offers the YMC325. Featuring linear motor drives and hydrostatic guide ways for all axes, the YMC325 operates with high stiffness and straightness. Non-physical contact drives and guide ways, as well as the high servo response drive, eliminate friction and ensure long-term operation.
To reduce thermal distortion, the Micro Center is equipped with a thermal distortion stabilizing system. A gas pressure balancer improves Z-axis motion accuracy and stabilizes balancing. The YMC325 boasts a thermally symmetric and low gravity structure. Due to reduced vibration, high acceleration/deceleration motion and high dynamic response on axial motion are achieved. A low friction cover further improves axial motion and feed stability. The highly rigid column of the YMC325 minimizes vibration on the Z-axis motion, while a three-point support bed provides consistent accuracy over time. Peripheral devices of the YMC325 are separated and isolated from vibration and heat.
For sub-micron accuracy tool measurement, the YMC325 includes a state-of-the-art DYNA VISION System. Featuring a 600X magnification lens and high pixel CCD camera, this system detects tools using 250,000 sensors at 0.7 µm/pixel. The high-speed shutter captures the rotating tool as a still image at up to 1500m/min surface speeds.
YMC325 travels are 300(X) mm x 250(Y) mm x 250(Z) mm, table size is 400 mm x 300 mm and table loading capacity is 50 kg. Spindle speeds reach 40,000 rpm (standard) / 60,000 rpm (optional); rapid travel 20,000 mm/min, feed rate 10,000 mm/min. (HAS-3); and 16 tools ATC. A 4th or 5th axis rotary table is available as an option.
