IN-DIE FEEDING SYSTEM INSTALLS FASTENERS DURING THE STAMPING PROCESS
Plug and Play: Working in tandem with a stamping press and properly tooled die, this portable system eliminates secondary operations typically required for fastener insertions and can easily be moved from press to press as needed on the shop floor.
The PEMSERTER® In-Die Fastener Feeding System from PennEngineering (Danboro, PA) is uniquely engineered to install self-clinching nuts, studs, and standoffs in assemblies during the stamping process. The portable system consists of die tooling, a fastener-feeding system, and a die-sensing system. Working in tandem with a stamping press and properly tooled die to feed and install fasteners, this portable system eliminates secondary operations typically required for fastener insertions. It can easily be moved from press to press as needed on the shop floor.
Users can realize increased assembly-line productivity, quality, and savings as two operations (stamping and fastener-installation) can be performed simultaneously in the die. This feeding system is virtually “plug and play” by utilizing multi-pin twist lock connectors to interface with the die and stamping press. All that is needed to operate the system is a standard 110V receptacle and shop air.
Recognizing the need for flexibility, the system can be configured to feed nuts, studs, and/or standoffs for multiple or single insertions, generally matching the stamping press rate. Operators are guided by a touch-screen for set-up and operation and have an online library of fault/help screens. Removable tooling can handle complex workpieces and offers considerable adaptability capable of reaching into areas generally considered inaccessible.
Customized tooling can be engineered to meet particular application needs. Customers are fully supported from die design through installation and in-house training.
PennEngineering®, 5190 Old Easton Road, Danboro, PA 18916-1000, 215-766-8853, Fax: 215-766-0143, www.pemnet.com.
