Force Gauges Verify Chuck Jaw Performance
Jaw Force Gauges from Dillon Manufacturing allow users to accurately measure the force applied to each chuck jaw independently, so that problems can be diagnosed and corrected before a failure occurs. This reading in pounds of chucking force per jaw represents the holding force available for that specific jaw, rather than a total force of two or three jaws as other gauges measure. Poorly gripped parts can be dislodged by tool pressure, resulting in production losses and unsafe operation. The Dillon Jaw Force Gauges help manufacturers reduce production losses by verifying rated jaw force, identifying potential safety hazards, and establishing effective maintenance schedules. With a force range from 0 to 30,000 pounds, the gauges are simple to install and easy to use, making them ideal for chucks from 6” to 18”, with other chucks supported up to a maximum of 25,000 lbs. rated force per jaw.
With this proven product, measurements can be taken and compared to determine whether a chuck meets the manufacturer’s established jaw force ratings or if maintenance is required. The gauges help identify when lubrication is needed, when a drawbar or drawtube adjustment is required, or when internal chuck components may be worn or broken. They also assist in determining whether chuck jaws are achieving full travel or if disassembly and cleaning are necessary.
In addition, Dillon Jaw Force Gauges help users evaluate whether an air or hydraulic actuator requires adjustment to correct leakage or bypass, or if line pressure must be adjusted to ensure proper part chucking. Designed for use with chucks from a wide variety of manufacturers, the gauges help keep chucks operating at full force for maximum production efficiency and extended service life. Each Jaw Force Gauge sold by Dillon includes detailed instructions for proper setup and use.
About Dillon Manufacturing, Inc.
Dillon Manufacturing, Inc. produces a complete line of standard and custom workholding solutions, including chuck jaws, chucks, vise jaws, soft jaws, hard jaws, collet pad jaw systems, chuck lubrication products, and more. All Dillon products are made in the USA, and the company is ISO 9001:2015 registered.
